Producer:





    Login: Password:    Create account!     Forgotten password

Alclad II -118 1oz.Titanium Gold Lacquer

Price $13.85
or 6300 pts.
Availability: in stock!

Quantity
Check shopping cart content >>>

Producer: Alclad II
Product code: Alclad II -118
Added to catalogue: 19.2.2008
:
Farby doskonale imitujące powłoki metaliczne
 












APPLICATION GUIDE-PLASTIC MODELS:

For use on injection plastic kits a primer is necessary. ‘Regular ALCLAD’ is similar in strength to lacquer/cellulose car paints-injected polystyrene plastics frequently have areas which ALCLAD can craze. High-Shine ALCLAD finishes require a glossy base coat.

REGULAR ALCLAD FINISHES

ALC-101 ALUMINIUM

ALC-102 DURALUMINIUM

ALC-103 DARK ALUMINIUM

ALC-104 PALE BURNT METAL

ALC-106 WHITE ALUMINIUM

ALC-108 PALE GOLD

ALC-110 COPPER

ALC-111 MAGNESIUM

ALC-112 STEEL

ALC-113 JET EXHAUST

ALC-116 SEMI MATTE ALUMINIUM

ALC-117 DULL ALUMINIUM

ALC-120 GUNMETAL

ALC-121 BURNT IRON

ALC-123 EXHUAST MANIFOLD

Apply one of these primers before using Regular ALCLAD:

Alclad ALC-302 GREY PRIMER

Alclad ALC-306 WHITE PRIMER & MICROFILLER

Alclad ALC-309 BLACK PRIMER & MICROFILLER

Tamiya or Gunze Sangyo plastic primers

Auto Primer-white or grey

Plastic primers and auto primers should be lightly polished with 1000/1200 wet & dry paper to give a less absorbent smooth surface .

HIGH SHINE ALCLAD FINISHES

ALC-105 POLISHED ALUMINIUM

ALC-107 CHROME FOR PLASTIC

ALC-109 POLISHED BRASS

ALC-114 CHROME FOR LEXAN

ALC-115 STAINLESS STEEL

ALC-118 GOLD TITANIUM

ALC-119 AIRFRAME ALUMINIUM

ALC-122 MIRRORED GOLD FOR LEXAN

Apply one of these primers before using High Shine ALCLAD:

ALCLAD GLOSS BLACK BASE ALC-304/305

ALCLAD CLEAR BASE ALC-303

(Other hobby enamel paints are suitable-it is advisable to conduct a test on scrap plastic)

PREPARATION AND SPRAYING

The surfaces to be painted must be thoroughly clean and free from dust,grease,oil and finger marks.

Apply the correct primer for the type of Alclad being used.

ALCLAD should be sprayed at 12-15psi. Spray from a distance of 2-3 inches from the surface being painted using a narrow to medium width spray fan. Use the airbrush like a paint brush-aim to cover the model in a methodical manner.

Buffing is not necessary-tonal variation can be made by polishing selected panels with Micromesh.

REGULAR ALCLAD can be masked over and painted. Decal solutions can be used with REGULAR ALCLAD, but are not recommended for HIGH SHINE ALCLAD

The PRISMATIC finishes require a dark base coat-use ALCLAD GLOSS BLACK BASE. Apply 2-3 light coats. When completely dry finish with 2-3 coats of ALCLAD CLEAR BASE. ALCLAD HOLOMATIC SPECTRAL CHROME should be applied over ALCLAD GLOSS BLACK BASE. Apply 1-2 light coats. When completely dry finish with 2-3 coats of WATER BASED CLEAR.

KLEAR KOTE finishes:

ALC-311 KLEAR KOTE LIGHT SHEEN

ALC-312 KLEAR KOTE SEMI-MATTE

ALC-313 KLEAR KOTE MATTE

ALC-314 KLEAR KOTE FLAT

ALC-600 AQUA GLOSS

 

Candy Enamels:

Bright Silver Candy Base:

Shake thoroughly before use. Do not thin. Surfaces must be completely clean. Apply 1 medium coat at 20-30PSI to clean bare plastic. Dry time 15-30 minutes. As the carrier evaporates the shine will develop. Allow to cure for 1 hour before coating with Alclad Candy Enamels. Avoid using in excessively damp or humid conditions.Finger marks on the bare plastic will appear in the final finish.

 

Candy Enamel top coats:

Shake thoroughly before use. Do not thin. Apply over Aclclad Bright Silver Candy Base. Spray light coat at 20-25PSI. Wait 5 minutes. Apply further even coasts. Allow 5 minutes between each coat. Leave to cure for 2 hours before handling.

 Candy Emamel finishes:

Alc 701 Bright Silver Candy Base

Alc 702 Candy Red Enamel

Alc 703 Candy Ruby Red Enamel

Alc 704 Candy Orange Enamel

Alc 705 Candy Lemon Yellow Enamel

Alc 706 Candy Golden Yellow Enamel

Alc 707 Candy Bottle Green Enamel

Alc 708 Candy Emerald Green Enamel

Alc 709 Candy Electric Blue Ename

Alc 710 Candy Cobalt Blue Enamel

Alc 711 Candy Indigo Enamel

Alc 712 Candy Violet Enamel

English Directions for Lexan Polycarbonate

APPLICATION GUIDE LEXAN/POLYCARBONATE CAR BODY SHELLS

The surface must be thoroughly cleaned-remove release agent,adhesive residue and finger marks.

REGULAR ALCLAD -apply 2-3 light coats back with any R/C paint

HIGH SHINE ALCLAD-apply 2-3 light coats back with black or silver

WATER BASED PAINT

———————————————————————————————————–

SPECIAL EFFECT ALCLAD FINISHES

ALC-201 PRISMATIC SCARABEUS BLUE TO GREEN

ALC-202 PRISMATIC MAPLE COPPER RED TO GREEN

ALC-203 PRISMATIC JADE GREEN TO GOLD

ALC-204 PRISMATIC SAPPHIRE DEEP BLUE TO VIOLET

ALC-205 HOLOMATIC SPECTRAL CHROME 7 COLOUR SPECTRUM TO CHROME

APPLICATION GUIDE LEXAN/POLYCARBONATE BODY SHELLS

Apply 2-3 light coats of PRISMATIC or HOLOMATIC SPECTRAL CHROME to the inside of a clean body shell. Allow to dry thoroughly then back with black or silver WATER BASED PAINT.

 

Airbrush Selection

Base coat regular finish

Top coat regular finish

High shine finish

Chrome

 
 
QUANTITY REALISATION DATE
1 thursday, 28.8.2014
> 1 friday, 29.8.2014
   Availability history:
   




Add Your opinion about: 1oz.Titanium Gold Lacquer

positive
neutral
negative
0 + 4 =