Eduard

DISCONTINUED Eduard 11137 Albatros D.V / Fokker Dr.I / Fokker D.VII Limited edition

Albatros D.V  /  Fokker Dr.I  /  Fokker D.VII Limited edition - Image 1
Scale: 1:48
Manufacturer: Eduard
Product code: edu11137
Availability: out of stock
Last available: 8.24.2020
$61.12 or 38800 pts.

Includes 0% VAT
when shipping to the country: United States
To change the country click here

If this item is currently unavailable, enter your e-mail address below to receive an automatic notification when it is back in stock!

Is it possible to back order an item that is not listed on the website, or that is listed as "unavailable"?

Basic information

ManufacturerEduard
Product codeedu11137
Weight:0.79 kg
Ean:8591437548132
Scale1:48
Added to catalog on:2.21.2020
Tags:Albatros-D.V Fokker-I Fokker-D.VII

Du doch nicht!! Three aircarft flown by top German WWI Ernst Udet. The packing contains plastic kits and accessories, resin pilot figure and Pour le Mérite pin. marking

German Fokker Dr. I triple-lobe fighter plane from the First World War. The work of Anthony Fokker and Reinhold Plat. The plane was a German response to the appearance of the British Sopwith Triplane fighter. The Fokker Dr.I was characterized by fantastic maneuverability, a very high rate of climb, and achieved a decisive advantage in wheel combat with biplane planes. However, it had a low top speed (165 km / h), which was partly also due to the use of a weak 110 HP engine. The first pre-production vehicles (marked with the symbol V.5) were tested by eminent German pilots: Werner Voss and Manfred von Richthofen, nicknamed the "Red Baron". It was the latter who made this model of aircraft famous, winning many victories on it. Serial Fokker Dr. I planes served at the front from October 1917. until the end of the war. A total of 320 units were produced. Technical data: Top speed: 165 km / h; climb speed 5.7 m / s, maximum ceiling 6095 m, armament: two 7.92 mm Spandau machine guns, firing through a propeller.

Albatros DV is a biplane of wooden structure with the front part of the fuselage, covered with aluminum sheet. The DV version did not differ much from its predecessor, the D.III series, mainly in terms of the fuselage section - the DV had an elliptical hull, which made it lighter by about 50 kg. The construction of the aileron drive was solved differently. These small changes seemed so small that the new aircraft was not even tested. The construction of the 1,5-wing aircraft, as in Nieuport, required a light aircraft. The inline albatrosses were too heavy for that. When recovering the aircraft from a dive flight, the lower lobe of the DV tended to break off frequently; this disadvantage was not eliminated by the end of the war. The D.Va version was stronger, but also heavier. About 900 Albatros DV series aircraft were built. Technical data: Maximum speed: 186 km / h; climb speed 4.2 m / s, ceiling practical 5700 m, armament: two 7.92 mm LMG08 / 15 machine guns.The Fokker D.VII is a German biplane fighter with a mixed structure (plywood, canvas, aluminum) from the end of the First World War. The flight of the prototype took place in January 1918, and in May of the same year, the plane entered service in the air. The Fokker D VII quickly demonstrated its superiority over the Allied aircraft. It had higher acceleration and a higher ceiling, which, combined with very good control devices, made the German pilots able to defeat 565 Allied machines in August 1918. Designed by Reinhold Platz, D VII was selected from among many other designs during the competition between January-February 1918. Baron Manfred von Richthofen (known as the "Red Baron") himself flew a prototype marked with the code V11. He later stated that the plane was easy to navigate, had a good climb rate, and was suited to "dive" flights in which the Fokker was found to be "rock hard". Other pilots also emphasized good visibility from the cockpit. The plane was of a mixed construction. The rectangular hull was made of welded steel pipes with a cloth cover. Only the nose of the fuselage housing the engine had removable side covers made of aluminum sheet. Double-girder panels, connected with each other by thin N-shaped stands, free-bearing with a thick profile, covered with plywood up to the first girder, the rest with canvas. The plane used Mercedes D.IIIa (180-200HP) or BMW IIIa 185HP engines as the drive. The BMW engine was a much better power unit, but as a result of limited production, the Mercedes engine was used on a much larger scale. It is worth noting that the Fokker D.VII flew min. Herman Goring, who achieved many air victories on it. The quality of the machine can be proved by the fact that it was produced until 1926. Technical data (for the version with the BMW-Fokker D.VIIF engine): length: 6.95 m, wingspan: 8.9 m, height: 2.75 m, maximum speed: 200 km / h, climb speed: 9, 52 m / s, maximum ceiling 6000 m, armament: fixed - 2 LMG 08/15 machine guns, cal. 7.92 mm. 3_edu11137_instruction_sheet.pdf
Mistake in the description? Report problem
Customer reviews
Add a review of: Albatros D.V / Fokker Dr.I / Fokker D.VII Limited edition
...
Added to catalog on: 2.21.2020
Availability: out of stock
  • item available
  • item unavailable
  • item available on request
  • delivery
  • unavailable
  • 1 pcs.
  • 2 pcs.
  • 3-5 pcs.
  • 6-10 pcs.
  • above 10 pcs.
Is it possible to back order an item that is not listed on the website, or that is listed as "unavailable"?
Recommended additions

Scale: 1:48
Manufacturer: Eduard
Product code: eduFE402
Availability: in stock!

$9.28 or 5900 pts.

Scale: 1:48
Manufacturer: Eduard
Product code: eduFE401
Availability: in stock!

$7.13 or 4500 pts.

Scale: 1:48
Manufacturer: Eduard
Product code: eduFE1419
Availability: in stock!

$16.41 or 10400 pts.

Scale: 1:48
Manufacturer: Eduard
Product code: eduEX513
Availability: in stock!

$5.26 or 3300 pts.

Scale: 1:48
Manufacturer: Eduard
Product code: eduEX1008
Availability: in stock!

$5.26 or 3300 pts.

Scale: 1:48
Manufacturer: Eduard
Product code: edu49744
Availability: 2-6 weeks

$17.45 or 11100 pts.

Scale: 1:48
Manufacturer: Montex
Product code: MT-MM48517
Availability: in stock!

$6.83 or 4300 pts.

Scale: 1:48
Manufacturer: Part
Product code: PRT-S48-131
Availability: in stock!

$26.29 or 16700 pts.

Scale: 1:48
Manufacturer: Montex
Product code: MT-SM48517
Availability: in stock!

$3.63 or 2300 pts.

Scale: 1:48
Manufacturer: Part
Product code: PRT-S48-127
Availability: in stock!

$26.29 or 16700 pts.

Manufacturer: Start
Product code: SRT-JASTA
Availability: 2-6 weeks

$120.86 or 76800 pts.

Manufacturer: Albatros Productions
Product code: LBT-WSDS22
Availability: 2-6 weeks

$47.08 or 29900 pts.

Similar items

Scale: 1:48
Manufacturer: Eduard
Product code: edu8113
Availability: in stock!

$26.02 or 16500 pts.

Scale: 1:48
Manufacturer: Eduard
Product code: edu8162
Availability: in stock!

$26.02 or 16500 pts.

Scale: 1:48
Manufacturer: Eduard
Product code: edu8136
Availability: in stock!

$30.56 or 19400 pts.

Scale: 1:48
Manufacturer: Eduard
Product code: edu8483
Availability: in stock!

$26.02 or 16500 pts.

Scale: 1:48
Manufacturer: Eduard
Product code: edu84155
Availability: in stock!

$17.31 or 11000 pts.

Scale: 1:48
Manufacturer: MisterCraft
Product code: mscD230
Availability: in stock!

$8.92 or 5700 pts.

Scale: 1:48
Manufacturer: Smer
Product code: sme0805
Availability: in stock!

$7.73 or 4900 pts.

Scale: 1:48
Manufacturer: Roden
Product code: rod421
Availability: in stock!

$21.36 or 13600 pts.

Scale: 1:48
Manufacturer: Roden
Product code: rod418
Availability: in stock!

$21.36 or 13600 pts.

Scale: 1:48
Manufacturer: Roden
Product code: rod420
Availability: in stock!

$21.36 or 13600 pts.

Scale: 1:48
Manufacturer: Smer
Product code: sme0803
Availability: in stock!

$7.73 or 4900 pts.

Scale: 1:48
Manufacturer: Roden
Product code: rod415
Availability: in stock!

$21.36 or 13600 pts.