Haliński

DISCONTINUED Haliński KA-SET-3-2011 Focke-Wulf Fw 190D-9 (Model With Laser Cut Frames)

Focke-Wulf Fw 190D-9 (Model With Laser Cut Frames) - Image 1
Scale: 1:33
Manufacturer: Haliński
Product code: HAL-KA-SET-3-2011
Availability: out of stock
Last available: 3.12.2020
$27.46 or 15300 pts.

Includes 0% VAT
when shipping to the country: United States
To change the country click here

If this item is currently unavailable, enter your e-mail address below to receive an automatic notification when it is back in stock!

Is it possible to back order an item that is not listed on the website, or that is listed as "unavailable"?

Basic information

ManufacturerHaliński
Product codeHAL-KA-SET-3-2011
Weight:0.18 kg
Scale1:33
Added to catalog on:11.8.2016
Tags:Focke-Wulf-Fw-190

The Focke-Wulf Fw-190 is a German, single-engine, full-metal fighter aircraft with a covered cabin in the low wing design of the Second World War. The pilots considered the Fw-190 to be a better aircraft than the Messerschmitt Bf-109. A self-supporting low wing with a working Fw-190 coating was commissioned by the Luftfahrtministerium, assembled in the fall of 1937. Kurt Tank submitted two propulsion proposals - the first with a liquid-cooled Daimler-Benz DB 601 engine, and the second with the new BMW 139 radial engine. The latter was chosen, and the work started in the spring of 1938 was headed by Obering R. Blaser. The first prototype of the Fw-190V1 was ready in May 1939, and it was flown in Bremen on June 1, 1939 by Captain Hans Sander. The second prototype, the FW-190V2, armed with two MG131 and two MG17 machine guns - all 7.92 mm caliber, was flew in October 1939. To reduce aerodynamic drag, both were equipped with a tunnel air inlet in the propeller cap, but problems with overheating of the engine resulted in a return to the proven NACA shield design. Before the tests of these prototypes began for good, the decision was already made to replace the BMW 139 engine with a stronger, but longer and heavier BMW 801. It required many changes, strengthening the structure and moving the cabin back, which later became a source of problems with the center of gravity. The advantage was the removal of problems with exhaust gas permeation and overheating of the cabin interior due to its direct vicinity to the BMW 139 engine. The third and fourth prototypes were abandoned, and the Fw-190V5 with the new engine was completed at the beginning of 1940. Later, it received wings with a wingspan enlarged by one meter (from the original 9.5 m), which made it 10 km / h slower, but it increased the rate of climb and improved maneuverability. It was marked Fw-190V5g, and the variant with the shorter wing was Fw-190V5k. The first seven machines of the Fw-190A-0 information series had a short wing, the rest - a longer one. The first operational unit equipped with the Fw-190 - 6./JG 26 stationed at Le Bourget, declared its operational readiness in August 1941 and from the first meeting of the new fighter with the British Supermarine Spitfire, its advantage over them became apparent. During the war, a dozen or so versions of this great plane were created. The machines of the "A" version, along with a dozen or so modernizations, served as fighter planes. The versions marked "B" and "C" were only prototypes of high-altitude fighters intended for fighting strategic bombers, but they did not enter into serial production. The "D" variant, as the only one of the Fw-190s, was powered by the new 1750HP Jumo 213A engine and was the German response to the P-51 Mustang. The new engine extended the fuselage by several dozen centimeters. This variant also performed mainly hunting and high-altitude fighter tasks. Numerous variants of the "F" version were used as fighter-bombers as direct support of the battlefield. The "G" version played the same role as the "F" version, but had a greater range. During the entire war, over 20,000 copies of this one of the best fighters of World War II were produced. Technical data (version Fw-190A-8): length: 9m, wingspan: 10.51m, height: 3.95m, maximum speed: 656km / h, rate of climb: 15m / s, maximum range: 800km, maximum ceiling 11410m , armament: fixed-2 MG131 13mm machine guns and 4 MG151 20mm cannons (2 MG 151 / 20E cannons for the D-9 version).

Mistake in the description? Report problem
Customer reviews
Add a review of: Focke-Wulf Fw 190D-9 (Model With Laser Cut Frames)
...
Added to catalog on: 11.8.2016
Availability: out of stock
  • item available
  • item unavailable
  • item available on request
  • delivery
  • unavailable
  • 1 pcs.
  • 2 pcs.
  • 3-5 pcs.
  • 6-10 pcs.
  • above 10 pcs.
Is it possible to back order an item that is not listed on the website, or that is listed as "unavailable"?
Recommended additions

Scale: 1:33
Manufacturer: Haliński
Product code: HAL-KA-Canopy-48
Availability: in stock!

$6.74 or 4300 pts.

Scale: 1:33
Manufacturer: Haliński
Product code: HAL-KA-Barrels-23
Availability: in stock!

$6.30 or 4000 pts.

Scale: 1:33
Manufacturer: Haliński
Product code: HAL-KA-Wheels-09
Availability: in stock!

$10.82 or 6900 pts.

Manufacturer: Kagero
Product code: KAG-TD-7026-EN+PL
Availability: in stock!

$19.54 or 10600 pts.

Manufacturer: Kagero
Product code: KAG-MON-3005-EN+PL
Availability: in stock!

$29.73 or 16100 pts.

Manufacturer: Kagero
Product code: KAG-MON-3004-PL+EN
Availability: in stock!

$23.15 or 12600 pts.

Manufacturer: Kagero
Product code: KAG-MON-3001-PL+EN
Availability: in stock!

$23.15 or 12600 pts.

Manufacturer: MA Publications
Product code: MAP01
Availability: 2-6 weeks

$26.18 or 16600 pts.

Manufacturer: Start
Product code: SRT-LIF23
Availability: 2-6 weeks

$28.08 or 17800 pts.

Manufacturer: Start
Product code: SRT-LIF29
Availability: 2-6 weeks

$33.59 or 21300 pts.

Manufacturer: Start
Product code: SRT-LIF24
Availability: 2-6 weeks

$28.08 or 17800 pts.

Manufacturer: Guideline Publications
Product code: GUI-GPSAMCC7
Availability: 2-6 weeks

$26.21 or 16700 pts.

Similar items

Scale: 1:33
Manufacturer: Haliński
Product code: HAL-KA-1-2018
Availability: in stock!

$25.21 or 14100 pts.

Scale: 1:33
Manufacturer: Haliński
Product code: HAL-KA-SET-1-2018
Availability: in stock!

$41.07 or 22900 pts.

Scale: 1:72
Manufacturer: IBG
Product code: IBG72548
Availability: in stock!

$46.53 or 29600 pts.

-25%

Scale: 1:72
Manufacturer: IBG
Product code: IBG72545
Availability: in stock!

$27.53 $20.62
or 17500 pts.

Scale: 1:48
Manufacturer: Hobby Boss
Product code: HBB81716
Availability: in stock!

$17.12 or 10900 pts.

Scale: 1:32
Manufacturer: Hobby 2000
Product code: HBD32012
Availability: in stock!

$53.41 or 33900 pts.

Scale: 1:48
Manufacturer: Tamiya
Product code: tam25213
Availability: in stock!

$36.71 or 22200 pts.

Scale: 1:48
Manufacturer: Eduard
Product code: edu8188
Availability: in stock!

$37.17 or 23600 pts.

Scale: 1:72
Manufacturer: Plastyk
Product code: PLK012
Availability: in stock!

$3.91 or 2500 pts.

Scale: 1:72
Manufacturer: Hobby Boss
Product code: HBB80228
Availability: in stock!

$7.87 or 5000 pts.

Scale: 1:32
Manufacturer: Hasegawa
Product code: hasST19
Availability: in stock!

$53.41 or 33900 pts.

Scale: 1:72
Manufacturer: IBG
Product code: IBG72540
Availability: in stock!

$27.53 or 17500 pts.